Drop Cable KCO-L925B 45mm FTTH Fiber Optic Mechanial Splicer Rep Quang

KCO-L925B FTTH Fiber Optic Quick Connector Optical Fiber Field Assembly Mechanical Splicer For Drop Cable

Description: 

- Mechanical Splice (DT-BFMS-925B). 

- Suitable for : φ0.25 mm & φ0.90 mm fiber,

- Optical fiber diameter: 125μm,

- Tight buffer diameter: 250μm & 900μm,

- Insert loss:≤ 0. 15 d (1310nm & 1490nm& 1550nm )

- Return loss: ≤ -50dB,

- Using temperature: -40~+75 C,

- Size:45*4.0*4.7mm.

Feature: 

- Bare fiber, tight-clad and pigtail triple can fully meet environmental requirements for end-customer;

- Unique Box type crimping technology;

- It is applicable for optical fiber splicing and restoration for damaged lines.

- Precision metal alloy components coaxial autocollimator on the core, excellent durable optical performance;
- Fiber axial solid fit, reducing the performance degradation caused by the loss of matching fluid;
- Intermittent fit connection technology to ensure signal transmission;
- Integrated shell protection, can be long-term used outside;
- High rate of success for installation and easy installation, the average connecting time is 150 seconds;

Characterist:

Description: 

- Proven mechanical splice technology ensuring precision fiber alignment, a factory pre-cleaved fiber stub and a proprietary index-matching gel combine to offer an immediate low loss termination to either single-mode or multimode optical
fibers.

- Can be reconnected in the field

- No epoxy or polishing required

- Compatible with both 3mm drop cable and 3x2mm flat cable

- Fast and easy installation.
- Field-termination connector with no epoxy or polishing required
- No matching gel enables low reflection and high reliability
- Splicing point is inside of the connector. No additional splicing work required
- Easily assembled with one-touch, push-pull system
- Used for φ3.0mm,φ2.0mm cable and 3x2mm drop cable etc
- The fusion splice position can be protected by the heat shrinkable tube inside, not easy broken
- 100% qualified, prolong use life, reduce the Maintenance cost
- The operator can confirm if the splicing is successful by the monitor of fusion splicing machine, to make it have more stability

- The 1 ferrule without on-site grinding, can be directly connected with the butterfly cable, Phi 3, Phi 2, Phi f0.9 weld.
- Can achieve high optical performance, the average insertion loss of less than -0.20dB, the return loss is more than 55dB.
- Products in the use of the process is not affected by the environment, the basic optical properties no change, no failure rate, long service life, reduce the cost of late maintenance.
- Tail specific optical fiber "micro bend" structure can be when the tail cable is subjected to violent tension to protect the effective.
- Splice inside the connector on the protection of the heat shrinkable tube, effective to splice protection, ensuring product safety performance and service life
- The rear end of the special stepped up structure, the product of tensile strength is greater than 60N.
- The operation is simple and quick, the operator needs no professional skills.

Product photo:

 

 

 

Relation products: 

Factory photo: