Vertical FOSC Optical Fibre Cable Joint Closure 6 12 24 Core 1 In 2out KCO-H12-48SZ

 
Introduction
- Series of Optical Fiber Cable Joint Closure products selected high quality plastic materials, the scientific and rational formula, injection molding.

- Can effectively prevent the nature of heat, cold, light, oxygen and microbial-induced aging of the material, and has excellent mechanical strength, rugged cable connector box shell and the main structural parts can withstand the harsh nature of the environment in a strong temperature.

- Waterproof, vibration, impact, cable tension, distortion and other protection, can adapt to any country's natural environment to use.

- The box work fine and delicate, high-grade galvanized metal parts processing, structural design careful and reasonable, for the excellent voice, image and data transmission to provide high-quality assurance.
 
Features 
- Great mechnical performance
- Great resisting aging performance
- High airproof,dampproof and resisting,lightning strike performance
- Can be place with the aerial cabal or buried in carth put in the pipeline
- The in and out channels can be two to six
 
Application

- FTTX (FTTP, FTTH, FTTN, FTTC)
- Local Area Networks (LAN)
- Test Equipment
- CATV
- Analog/Digital Passive Optical Networks (PON)
 
Main performance
- Stretch: the box body inflated after sealing 60KPa ± 5Kpa, can withstand 1000N axial tension, to maintain 1 min, no change in air pressure;
- Flattening: The box body is sealed and inflated at 60KPa ± 5Kpa, and it can bear the horizontal uniform pressure of 2000N / 10cm. The pipe can withstand 600N / 10cm without change of air pressure.
- Hit: the box after sealing inflatable 60KPa ± 5Kpa, in the box above the 1.6 drop 1 kg steel ball, the impact of three times, the box does not crack, pressure no change;
- Bending: the box after sealing inflatable 60KPa ± 5Kpa, tension load 150N, bending angle ± 45°, 10 cycles, no change in air pressure;
- Reverse: the box after sealing inflatable 60KPa ± 5KPa, torque 50N.m, torsion angle +90°, 10 cycles, no change in air pressure;
- Sealing performance: gas pressure 100kPa ± 5kPa, water bath soak 1 5min, no bubbles to escape, no change after 24hr pressure;
- Insulation resistance: water depth 1.5m, soak 24hr, the insulation resistance ≥ 2 × 104MΩ;
- Resistance to voltage intensity: water depth 1.5m, soak 24hr, 15KV DC 1min without breakdown, no arcing phenomenon;
- High temperature test: the box after sealing inflated 60kPa ± 5kPa, at + 60 ℃ for 2hr, the box without deformation, no leakage;
- Low-temperature test: box sealed inflatable 60kPa ± 5kPa. The temperature at -40 ℃ for 2hr, the box without deformation, no leakage;
- Temperature cycle test: the box after sealing inflatable 60kPa ± 5kPa. -40 ℃ each point constant temperature 2hr, three cycles, the pressure drop amplitude ≤ 5kPa.